12. Disposal
Dispose of the system joint and its individual parts properly. The product must not be dis-
posed of with the residual waste (fig. 14). Please comply with the applicable national laws
and local regulations for the proper recycling of recyclable materials.
For proper disposal, it is necessary to demount the system joint from the orthosis.
fig. 14
13. Signs and Symbols
Symbols on the Packaging
medical device
14. CE Conformity
We declare that our medical devices as well as our accessories for medical devices are in conformity with the
requirements of Regulation (EU) 2017/745. Therefore, the FIOR & GENTZ products bear the CE marking.
15. Legal Information
With the purchase of this product, our General Terms and Conditions of Business Transactions, Sales, Delivery
and Payment will apply. The warranty expires, for example, if the product is mounted several times. Please
note that the product is not supposed to be combined with other components or materials than with those
recommended by the FIOR & GENTZ Orthosis Configurator. Should the product be combined with products from
other manufacturers, a written consent by the seller is required.
The information in these instructions for use is valid at the date of printing. The contained product information
serves as a guideline. Subject to technical modifications.
All rights, particularly the distribution, copy and translation of this manual or any part of it, in paper or as
electronic document, must be authorised in writing by FIOR & GENTZ Gesellschaft für Entwicklung und Vertrieb
von orthopädietechnischen Systemen mbH. Reprints, copies and any other electronic reproduction, even par-
tial, must be authorised in writing by FIOR & GENTZ Gesellschaft für Entwicklung und Vertrieb von orthopädie-
technischen Systemen mbH.
Printed version: 2020-05
24