1.
Press MENU button and then turn TUNE/SELECT knob to select ' Equaliser ',
press TUNE/SELECT knob to confirm.
2.
Turn TUNE/SELECT knob and then press it to select Normal, Classic, Jazz, Pop,
Rock, Speech or My EQ.
To set up My EQ, select 'My EQ ...', set up Treble, Bass and Loudness.
3.
Backlight
Press MENU button and then turn TUNE/SELECT knob to select 'Backlight',
1.
press TUNE/SELECT knob to confirm.
Turn TUNE/SELECT knob to select 'Power On' or 'Standby', then press
2.
TUNE/SELECT knob to confirm.
3.
Turn TUNE/SELECT knob to cycle through options: High/Medium/low, and
then press TUNE/SELECT knob to confirm the setting.
Language
1. Press MENU button and then turn TUNE/SELECT knob to select ' Language ',
press TUNE/SELECT knob to confirm.
2. Turn TUNE/SELECT knob to select language, and then press TUNE/SELECT
knob to confirm.
Factory Reset
Sometimes, you might want delete all the settings your radio currently has, try
have your radio return to its factory default settings, please do the following:
1.
Press MENU button and then turn TUNE/SELECT knob to select ' Factory
Reset ', press TUNE/SELECT knob to confirm.
2.
Turn TUNE/SELECT knob to 'Yes', then press TUNE/SELECT knob to confirm.
Software upgrade
This is for service engineer professional use only.
SW Version
The helpdesk may ask you for the software version of your product.
Press MENU button and then turn TUNE/SELECT knob to select ' SW version ',
press TUNE/SELECT knob to confirm. The software version will show on the
display.
15 (GB)