Cleaning And Maintenance - Domo DO7056S Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
FILL THE WATER RESERVOIR
1.
Press the unlocking button of the water reservoir and remove the reservoir from the appliance by
pulling it toward yourself.
2.
Remove the rubber plug from the reservoir. Fill the reservoir with water, making sure not to exceed
the maximum level. Use only mains water or 50 % mains water and 50 % de-mineralised water. Do
not use perfumed water. Press the rubber plug back in the opening.
3.
Replace the water reservoir.
4.
To fill the water reservoir during use, turn the appliance off with the on/off button. Remove the plug
from the socket and follow the instructions above.
BRUSH HEAD
The brush head can be used for thicker materials, furniture or removing hairs.
·
Attach the brush head when the appliance is cool.
·
The brush head has the word "UP" on it, meaning that that is the top of the brush head.
·
Place the top of the brush head on the top of the appliance. Then fasten the bottom with a click.
·
Always allow the appliance to cool completely before removing the brush head.
·
Remove the brush head by lifting the lid on the top.

CLEANING AND MAINTENANCE

·
Remove the plug from the outlet and allow the appliance to cool completely before cleaning.
·
Wipe the steam plate and the exterior of the appliance clean with a moist cloth.
·
Never use chemicals, abrasive or corrosive cleaning products.
·
Remove the water from the reservoir before storing the appliance.
www.domo-elektro.be
1
2
1
2
DO7056S
21

Publicidad

Tabla de contenido
loading

Tabla de contenido