Charging The Appliance - Imetec GK818 Instrucciones De Uso

CHARGING THE APPLIANCE

Before using the appliance for the first time, make sure it is fully
charged and the LED charging light is off. After you have turned the
EN
appliance on, the high battery indicator on the LED display (2) appears
when the appliance is fully charged, the low battery indicator flashes
when it is running out of charge.
In this case, set the appliance to charge.
Always make sure that the appliance is completely dry before using
or charging.
• Switch the appliance off.
• Plug the power supply unit (19) into a socket.
Do not leave the appliance permanently connected to the mains power
socket.
Always switch the beard trimmer off and unplug the plug from the
charger socket after charging is complete.
To extend the lifespan of the beard trimmer battery:
• Do not charge the battery every day. Preferably discharge the
battery completely every six months and then charge for 1.5 hours.
• Do not charge the appliance for longer than the recommended
charge time. Overcharging reduces the lifespan of rechargeable
batteries.
• If the appliance is not to be used for a prolonged period of time, it
must be charged for 1.5 hours before putting it away.
23