Futurelight MH-420 Manual Del Usuario página 59

- Test sequences
This function allows you to run a special demo-test sequences without an external controller, which will show
you some possibilities of using MH-420. Press [Up] and [Down] keys to select the "Mod1" or "Mod2"
sequences.
The "Mod1" is suitable for projections on the wall, ceiling or ground without any head-movement, the
"Mod2" uses all MH - 420 functions and therefore is good for a complete introduction of the fixture.Select
"Mod1" or "Mod2" by [Up] and [Down] buttons and press [Enter] to confirm the choice.If the test program is
running, message "run/test" flashes on the display.
If you want to pause
button(messages"PAUS"/"test" blink ).To continue the program running,press the [Enter]-button again.
- Stand Alone-settings
This menu offers options for stand-alone mode as a selection of playing program, programming and
modifying current programs.
Personality Display
Pan reverse
Tilt reverse
DMX
presetting
Blackout during
mov. Correction
Display
permanent on
Display intensity
Display reverse
Pan/Tilt feedback
Music trigger
Microphone
sensitivity
the runnnig program
Default values
(SHADED)
in the required position,
59
press the [Enter]-