Error And Information Messages; Technical Specifications - Futurelight MH-420 Manual Del Usuario

Error and information messages

This message informs you that the main PCB does not communicate correctly with the Control Board.
(Color-wheel error) This message will appear after the reset of the fixture if the magnetic-indexing circuit
malfunctions (sensor failed or magnet missing) or the stepping-motor is defective (or its driver circuit on the
main PCB). The color-wheel is not located in the default position after the reset.
(Static gobo-wheel error) This message will appear after the reset of the fixture if the magnetic-
indexing circuit malfunctions (sensor failed or magnet missing) or the stepping-motor is defective (or its driver
circuit on the main PCB). The static gobo-wheel is not located in the default position after the reset.
This message will appear if the fixture was shortly disconnect from the mains.
(PAN-yoke movement error) This message will appear after the reset of the fixture if the yoke's magnetic-
indexing circuit malfunction (sensor failed or magnet missing) or the stepping-motor is defective (or its driving
IC on the main PCB). The yoke is not located in the default position after the reset.
(TILT-head movement error) This message will appear after the reset of the fixture if the head's magnetic-
indexing circuit malfunctions (sensor failed or magnet missing) or the stepping-motor is defective (or its
driving IC on the main PCB). The head is not located in the default position after the reset.
This message will appear when the device has been defined as master device and a DMX-signal is present
at the DMX-input. Remove the controller cable from the input and redefine the device as master.

Technical specifications

Power supply
EU-model: 208/230/240 V AC, 50/60 Hz ~
Fuse: T 2,5 A, 250 V
US-model: 100/115/208/230/240 V AC, 50/60 Hz ~
Fuse: T 5,0 A, 115 V
Power consumption: 300 W
Lamp
CDM-SA/T 150/942 G-12 socket
Optical System
-Parabolic mirror for optimal luminousness
H
- igh luminous-efficiency parabolic mirror and double condenser system
-Standard 19° lens
-All lenses are anti-reflection coated
Colours
- 11 interchangeable dichroic-filters plus white
- Colour-wheel with variable rotation speed
Gobos
- 11 metal gobos plus an open position
- Outside diameter 26,5 mm, image diameter 22 mm.
Focus
- Manual focus
Strobe
- Strobe effect with variable speed (1 - 10 flashes per second)
Shutter/Dimmer
- Smooth dimmer from 0 - 100 %
Motor
- 5 high quality stepping-motors controlled by microprocessors
63