Using The Mp3 List - Samsung LN-T2353H Manual Del Usuario

Using the MP3 List
This menu shows MP3 files from among the files saved on a USB memory device.
1. Complete Steps 1 to 3 of "Using the WISELtNK Menu". (Refer to page 68)
2. Press the 4 or D,-button to move to 'Music", then press the ENTER button.
The saved file information is displayed as a folder or file.
Press the A or T button to select a file, then press the ENTER button.
To select all files or a file, press the INFO button to display the Music menus.
Press the ENTER button to select 'Play", "Music Repeat", or "Cancel the selected
file'.
• Pressing the ENTER button over a musical note icon immediately plays the
music file.
• Pressing the ENTER button over a folder icon shows the music files included in
the folder.
To select a file on the next page, press the REW 4 4 or FF _ i_ button to move
to the next page.
Press the PLAY/PAUSE _111 b utton while playing an MP3 file to pause the file.
Press the STOP button [] to exit Play mode.
To exit WISELINK mode, press the WISELINK button on the remote control.
>-- This menu only shows files with the mp3 fite extension. Files with other file
extensions are not displayed,even if they are saved on the same USB device.
>- The selected file is displayed on the top with its playing time.
>- To adjust the music volume, press the VOL+ or VOL- button on the remote
control. To mute the sound, press the MUTE button on the remote control.
>- FF _ D,-/REW 4 4 Key does not function during the play.
: Folder icon
: Photo icon
: Move to the previous
folder stage icon
Music function information icon (Displayed at the top left of the screen).
Icon Current OSD Function
(Music) All When all music files are being played.
(Music) One When a music file is being played.
(Music) Play/Pause
When pressing the PLAY/PAUSE_H button on the
remote control while music is playing. The music
stops and the 'Play' text appears at the top of the
screen.
(Music) Stop When pressing the STOP [] button on the remote
control when music is stopped. The music resumes
and the 'Stop' text appears at the top of the screen.