Viewing Picture=In-Picture - Samsung LN-T2353H Manual Del Usuario

Viewing Picture=in-Picture
This product has one built-in tuner_which does not allow PIP to function in the same mode. For example, you cannot watch one TV
channel in the main screen, and a different one in the PIP screen. Please see PIP Settings'below for details. You can use the PIP
feature to simultaneously watch two video sources. (See page 39 to select the PIP picture sound.)
>- While V-Chip (See page 61) in operation_ the PIP function cannot be used.
Activatinq Picture=in-Picture
1. Press the MENU button to display the menu.
Press the A or T buttons tosetect "Setup", then press the ENTER button.
Press the A or _' buttons to select 'PIP", then press the ENTER button.
Press the ENTER button again.
Press the A or _' buttons to select "On", then press the ENTER button.
:_ If you turn the TV off while watching in PIP mode and turn it on again, the PIP
window will disappear.
> You can view Analog TV broadcasts on the PIP screen (sub-picture) when the
main picture is from an external device connected to HDMI1 _2,3Component1,2
or PC
Main picture Sub picture
Component 1,2
HDMI 1_2_3 Analog TV broadcasts only
PC
>23_26 inch model supports HDMI1 and HDMI2 only
[1_ Alternately, you can press the PIP button on the remote control repeatedly to activate or
deactivate the PlR
Changinq the PiP Channel
3. Press the A or T buttons to select 'Channel", then press the ENTER button.
Press the _, or • buttons to select the desired channel in the PIP window.
Press the ENTER buttons.
MAIN: PC / HDMI 1,2_3/ Component 1_2
PIP: TV(Analog)
:_ The channel can be active when the sub picture is set to TV.
[_] Press the PIP Channel buttons on the remote control.
continued..