Sony PlayStation 2 Manual De Instrucciones página 9

2
Start the supplied DVD Player disc.
On the startup screen, press the ✕ button.
3
The Basic Operations screen is displayed.
With the Basic Operations screen displayed, press the ✕ button.
4
The Menu screen is displayed.
5
Select the "Installing DVD Player" option from the Menu screen
and press the ✕ button.
Complete the installation following the onscreen instructions.
Notes
• To view DVD video using the DVD Player installed on a Memory Card (8MB)
(for PlayStation
PlayStation 2) into a MEMORY CARD slot of the PlayStation
®
• Some DVD Remote Control functions will not work if you use DVD Player
software earlier than version 2.00. Refer to the PlayStation
instruction manual for details on how to check the version of your DVD Player
software.
For PlayStation
SCPH-35003
GT
or later, on a Memory Card (8MB) (for PlayStation
Remote Control functions.
• Before installing the DVD Player on the Memory Card (8MB) (for
PlayStation 2), be sure that at least 2,200 KB (2.2MB) of free space is available
®
on the Memory Card.
• Insert the Memory Card (8MB) (for PlayStation
slot 1 of the PlayStation
Card in MEMORY CARD slot 2.
• Do not remove the Memory Card (8MB) (for PlayStation
installation is in progress. The installation will be incomplete if the Memory
Card is removed or the PlayStation
installing.
2), you must insert the Memory Card (8MB) (for
®
2 consoles of model numbers SCPH-30003, SCPH-30004,
®
and SCPH-35004
2 console. Installation is not possible with the Memory
®
, you must install DVD Player (ver 2.00),
GT
2) to activate all DVD
®
2) into MEMORY CARD
®
2 console is turned off or reset while
®
2 console.
®
2 console
®
2) while the
®
GB
9