Understanding Your Treatment System - Lotus 14005R4 Manual De Uso

UNDERSTANDING YOUR WATER TREATMENT SYSTEM
UNPACKING YOUR UNIT:
Unit with Processing
Carafe
Most obvious is the
unit itself, with the
Processing Carafe
resting on top of the
base. There is also a
pre-filter screen
sitting on top of the
Processing Carafe.
C
A
B
FIGURE 1
FIGURE 2
FIGURE 3
These are the components you will find as you unpack your Water Treatment
System.
Carbon-Block Filter Clean Water Carafe
The carbon block A Clean Water Carafe
filter is a long white
cylindrical shape with
2 red plugs at either
end.
Do not overfill, as this may adversely affect performance of the unit.
ROTARY TABLE:
If the Processing Carafe is inadvertently over filled, some excess water will show up
here. Just wipe any excess water. (FIGURE 1)
The water drain valve (B) is located diagonally and to the right of the water overflow
port. Water travels to the carbon-block filter through this valve. It is normal to see
water in this area. (FIGURE 1)
Port (C) is where the ozone is dispersed into the water. When the ozonation process
is taking place, you will be able to see the bubbling process occurring. (FIGURE 1)
PRE-FILTER SCREEN:
may be in your drinking water. You can remove this filter for cleaning. It simply pulls off
and fits snugly into place. Unless damaged, the pre-filter screen never needs to be
replaced. (FIGURE 2)
CLEAN WATER CARAFE:
2 liters) of sanitized water. It is also designed to look great on your table. It is made of
tough, durable plastic and will last years of normal use. It fits snugly in the curved
space under the dispense nozzle. When placed here, it activates the auto-dispense
button. At the end of the sanitizing process, water is automatically dispensed into the
clean water carafe. There is no need to push the manual dispense button when filling
this carafe. (FIGURE 3)
PROCESSING CARAFE:
It may look like a heavy water jug, but it is
fairly light. The transparency of the jug
allows the visual display of the most
advanced technology available in water
treatment today. The Processing Carafe is
where the first stage of treatment process
occurs. The ozonation process stage is
designed to kill some of the most common
microorganisms that may be in your water.
(See "Performance Data List" for details).
with a lid.
Notice the water line on the side of the
Processing Carafe. This is the fill line
indicating 2 quarts (approx. 2 Liters).
When filling the Processing Carafe always
make sure that the Processing Carafe is
filled to this line.
The water port (A) is located in the centre of the rotary table.
This is designed to catch any larger sediment that
This is designed to hold up to 2 quarts (approx.
3