Franke ZAQUA020 Instrucciones De Montaje página 3

A3000 open Surface Sensor
ZAQUA020................................... hot-water side (red)
ZAQUA021................................... cold-water side (blue)
Please refer to the graphics in the German Installation and Operating Instructions.
1. Warranty
Liability is accepted according to the General Terms and Conditions of Business and
Supply.
Only use original replacement parts!
2. Application
Surface temperature sensor for application with AQUATIMER - A3000 open shower
fittings for recording temperatures with a PT1000 sensing element. For the hot-water
side (HDW / red) or for the cold-water side (DW / blue), to monitor thermal disin-
fection at the discharge fitting.
3. Dimensions
4. Assembly Instructions
☞
To obtain an improved heat flow, it is recommended to place a few drops of heat
transfer compound (to be provided by the customer) on the
surface sensor
4.1 Place the
4.2 Place the soft-binder (c) around the
surface sensor
4.3 Connect the
0English
(b) on the pipeline (a).
surface sensor
(b) to the electronic module (d).
surface sensor
and the pipeline, and hook it in.
EN
(b).
3