Safety Instructions; Important Safeguards - Rexel A3 SignMaker Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
specifications
Electrical
Machine Dimensions
Machine Weight
Maximum Sign Cover Width
Maximum Sign Cover Weight
Warm Up Time
Subject to technical changes without prior notice.
introduction
Thank you for purchasing the Rexel SignMaker. The SignMaker heats up to operating temperature and retains its heat so you can heat-
seal documents without waiting. The machine provides a visual indication when it is ready to use. Turn off the power and unplug the unit
when not in use.
For best heat-sealing results, please use Rexel Sign Covers.
Please take a little time to study these instructions to ensure you get the best results from your machine. Your new SignMaker may emit a
slight odour during its initial operation. It is normal and will diminish over time.
Download instant and customisable signs from: www.rexeleurope.com/signmaker

safety instructions

YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS IS
IMPORTANT TO ACCO
®
MANUAL AND ON PRODUCT ARE IMPORTANT SAFETY
MESSAGES. READ THESE MESSAGES CAREFULLY.
m
THE SAFETY ALERT SYMBOL PRECEDS EACH
SAFETY MESSAGE IN THIS INSTRUCTION
MANUAL. THIS SYMBOL INDICATES A POTENTIAL
PERSONAL SAFETY HAZARD THAT COULD HURT
YOU OR OTHERS, AS WELL AS CAUSE PRODUCT
DAMAGE OR PROPERTY DAMAGE.
THE FOLLOWING WARNING IS FOUND ON THE PRODUCT IN
SEVERAL LANGUAGES.
c
m
Electrical shock hazard.
Do not open. No user
servicable parts inside.
Refer servicing to qualified
service personnel.
This safety message means that you could be seriously hurt or
killed if you open the product and expose your self to hazardous
voltage.

important safeguards

m
WARNING: FOR YOUR PROTECTION, DO NOT
CONNECT THE SIGNMAKER TO ELECTRICAL
POWER UNTIL YOU READ THESE INSTRUCTIONS
COMPLETELY. KEEP THESE INSTRUCTIONS IN A
CONVENIENT LOCATION FOR FUTURE REFERENCE.
TO GUARD AGAINST INJURY, THE FOLLOWING
BASIC SAFETY PRECAUTIONS MUST BE OBSERVED
IN THE SET UP AND USE OF THIS PRODUCT.
m
WARNING: TO AVOID ELECTRICAL SHOCK
OR OTHER INJURY, THE FOLLOWING SAFETY
PRECAUTIONS MUST BE OBSERVED.
m
CAUTION: SHARP BLADE, DO NOT TOUCH THE EDGE
OF THE BLADE.
4
220-240VAC / 50Hz, 1.6A, 365W
W420 x D145 x H95mm
1.95kg
A3: 330mm
125 micron
4-6 Minutes
BRANDS. IN THIS INSTRUCTION
WARNING
location of controls
Power switch
11 Trimmer Housing
1
2
Temperature switch
12 Jam Release Lever
3
Power LED
13 Corner Cutter body
4
Ready LED
14 Corner Cutter lever
5
Top housing
15 Corner Cutter base
6
Bottom housing
16 Corner Cutter blade
7
Rail
17 Corner Cutter anvil
Rail clip
18 Trimmer blade selector
8
9
Ruler
19 Trimmer Blade button
10 Cutting strip
electrical safeguards
• The unit must be connected to a supply voltage corresponding
to the electrical rating shown on the machine.
• The socket outlet shall be installed near the equipment and shall
be easily accessible.
• Unplug the unit before moving it, or when it is not in use for an
extended period of time.
• Do not operate with a damaged supply cord or plug. Do not
alter the attachment plug. The plug is configured for the
appropriate electrical supply
• Do not overload electrical outlets beyond their capability. Fire or
an electric shock could result.
• The unit is intended for indoor use only.
• Never push objects through the air vents. Do not spill any liquid
of any kind on this product.
• This appliance is not intended for use by children. Take care
when operating near children.
general safeguards
• Use this unit for its intended purpose only.
• Do not place anything in the throat opening of the machine
other than Sign Covers/documents.
• Do not block the vent slots, this will cause the machine to
overheat.
• Place unit on a secure and stable work area to prevent the unit
falling and possibly causing personal injury and damage to
the unit.
• Follow all warnings and instructions.
service
Do not attempt to service or repair this product yourself. If the
unit becomes jammed or inoperable, immediately unplug and and
dispose of properly.
cleaning
m
WARNING: UNPLUG THIS MACHINE BEFORE
CLEANING THE EXTERIOR.
Wipe exterior only with a damp cloth and do not use
detergents or solvents.

Publicidad

Tabla de contenido
loading

Tabla de contenido