Tabla de contenido
Publicidad
MACHINE'S CHARACTERISTICS
1.- OVERALL DIMENSIONS
2.- INTRODUCTION
We thank you to choosing our product. We are convinced that you will be satisfied
with it and that it will satisfy all your needs.
This manual contains some interesting information about the train installation, its
futuremaintenance or its repairing.
3.- POINTS TOTAKE INTOACCOUNT
- Machine is designed to be directed by a person through a control board. This
person must be able to see the whole railway.
- In case it rainsweadviseyounottousethetrain
- Control board must be plugged into an earthconnected socket
4.-MACHINECHARACTERISTICS
- Power: 1.8KW (when train runs with maximum speed)
- Timer adjustable between 2 and 12 minutes
-Machine's speed can be changed
- Railway power: 24Vcc
- Electromechanical train's control
-Maximum speed: at 3000 r.p.m. and 24V is 8Km/h
5.- INSTALLATION
Youmusttakenextpointsintoaccount tomakeacorrectinstallation:
Land must be completelly
level with an
unevenness of 0%
Move one straight track over 20cm
to place trainon railway taking into
acount that train turn inhand clock
sense
20cm
Screw railway and connect
powerpositive with positive and
negative with negative
FALGAS Comercial SL
8,35 mts
328.7"
Mount railway only pointing screws
Introduce machine and coaches
like figure shows.
Plug machine to an earth-connected
socket prepared for machine
comsumption
6.- STARTUP
First you must connect control board to an earthconnected socket prepared for
machine's consumption.
Before starting up the train you must check the tracks connection, they must
respect polarity.
Train always must turn in hourly sense (changes polarity sense when train
stops).
Next, protection thermics turn on and youmustproceed as follows:
0,95 mts
37.4"
RAILWAY POLARITY AND TURNING SENSE WHEN TRAIN
IS RUNNING
TEL
(972)
454483
SPAIN
1
0
- Select desired operating time with the timer
- Turn on general switch
- Push START button
- Change speed with speed selector
- Train will stop when the time programmed previously has finished. In case of
emergency you can stop the train by pushing the emergency stop push button.
7.-MACHINE DESCRIPTION
The machine has a control board containing all components which provide
24Vcc to railway.
Through a transformer with different primary stages an output voltagewhich is
rectified by a diode bridge is obtained.
Control board is equipped with different protecting elements:
-A10Ageneral thermic..
-A63Athermic in the secondary stage of the transformer.
-Ahigh sensitivity circuit breaker.
When train is running it makes his typical sound. In the locomotive there is a
push button thatmakes the hoot of the train.
Mechanical structure ismadeinlaminatedsteelandepoxi painted.
Wheels are GG-22 foundry iron and other material such belts and chains, are
first quality.
Preventive measure are to check cogged belts and chain tension, as well as
motion parts lubrication periodica
RED
BLACK
Voltage
lly
TREN SAFARI
3
2
1
0
Publicidad
Tabla de contenido
