HumanTechnik cm-light Instrucciones De Servicio página 21

No. Control feature Function and application CM-light
8 Sound pattem
selector switch
9 Battery compart- The battery compartment is located on the back of the device
ment cover
10 Recording
device
pendant cord
Inserting the batteries into the CM-1 transmitter:
The device runs on two rechargeable "AAA"-type batteries. It can also run on
non-rechargeable batteries.
Where necessary, only use original replacement batteries.
If you run your CM-1 communication system on disposable batteries, don't place the
transmitter onto the CM charger.
Ensure that the batteries are placed the right way around into the
battery compartment. The stipulated installation direction is indicated
on the bottom of the battery compartment.
N.B. This battery is not adequately charged upon delivery and has to be
!
charged fully on the CM charger first of all.
There is a slide switch on the back of the device for setting the
following 3 frequency ranges:
Switch HI
setting ME
LO
Slide the selector switch to the required position using the
supplied pin.
and holds both batteries.
Insert the knob of the pendant cord into the circular part of the
device and engage the knob perceptibly by pushing it towards
he tip of the device.
"High" sound control for more treble
"Medium" sound control for equal treble
and bass
"Low" sound control for more bass
English 21