Pc Camera; Camera App; Taking Pictures/Capturing Video - Clevo P570WMx Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

PC Camera

When the PC Camera is in use the LED indicator to the
left of the camera will be illuminated in red (see
Map: Front View with LCD Panel Open" on page

Camera App

1. Run the Camera app from the Start screen by clicking on the
Camera icon
.
2. The camera interface will display two buttons on the right side
of the screen.
3. The upper button
is used to record video, and the lower
button
is used to take still pictures.
4. Right-click on the screen to bring up menu buttons at the
bottom of the screen.
5. These buttons enable you to access the Camera roll (where
captured pictures and video are displayed), set the timer (the
time period before capture begins) and set the exposure level
using the slider to obtain the best results.

Taking Pictures/Capturing Video

1.
Run the Camera app from the Start screen by clicking on the
Camera icon
"System
2.
Click to select the timer if you require a countdown before
9).
capture.
3.
Click to select either photo
4.
Click in the appropraite icon to take a picture or start video
capture (if video capture begins a timer will appear in the
bottom left corner of the screen).
5.
To stop video capture click the main window again (or click the
stop icon
6.
Captured photos and videos will be saved to a Camera Roll
folder within the Pictures folder.
.
or video
).
mode.
27

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido