Girard-Perregaux LAUREATO Instrucciones De Uso página 76

Before making any correction, ensure that the time display is between 9:30 AM and
8:30 PM. Outside this range, any rotation of the stem in position 1) will have no effect. Use
midnight as a reference for the date and day change to ensure you are positioned at the right
time of day.
A. Turn the crown of your watch into the date setting position, position 1).
B.
Turn the crown until the day hand a) indicates the desired date. The crown can be turned in
both directions. The month disc b) is synchronized with the date hand, so it does not need to
be changed.
C. At the desired date, push the crown back against the case, in position 0) ; the watch will
restart immediately.
After making any setting, always return the crown to its original position against the
case, position 0), to preserve the water-resistance of your watch and prevent any damage to the
mechanism. To do so, refer to chapter "Crown".
A
76
. For February, the date take approximately
st
st , passing through the 30
B
th and 31 st .
C