A
B
a)
b)
C
0)
80
A. Pull out the crown of your watch into the date setting position, in
1)
position 1).
B. Turn the crown until the day hand a) indicates the desired date.
The crown can be turned in both directions. The month disc b) is
synchronized with the date hand, so it does not need to be changed.
C. At the desired date, push the crown back against the case, in
position 0); the watch will restart immediately.
1)
After making any setting, always return the crown to its original
position against the case, position 0), to preserve the water-resistance of
your watch and prevent any damage to the mechanism. To do so, refer to
chapter "Crown".
For months with 30 days, the date takes approximately 4 hours
31
st
. For the month of February, the date takes approximately 7 hours
the 30
th
and 31
through the 29
st
, and approximately 12 hours in a common year, passing
, 30
and 31
.
th
th
st