Cordivari My Way Instrucciones De Uso página 16

English
These buttons are only displayed if one device type is installed in the
room (colored if active).
4. Current mode, press on this icon to enter in the menu where you can
change the current operating mode
5. Heating status (black when there is no demand in the room, red
when there is a demand in the room)
6. Room name
7. Ambient temperature or room setpoint, you can switch between
these 2 values by using 9
8. Information about the heating/cooling devices installed in the room.
9. To switch between ambient temperature / room setpoint displayed in 7
10. Set the current setpoint
11. Quick access to the desired room
12. Scroll between rooms
13.
a. When key-lock is activated
b. When holiday mode is activated
c. When away mode is activated
Press on « 4 » in the previous menu to access this modes menu.
Comfort Mode : Set the room in comfort mode. If it remains active,
the comfort temperature will be followed all the time.
Reduced Mode: Set the room in reduced mode. If it remains ac-
tive, the reduced temperature will be followed all the time.
Timer or Boost Mode: Temporary derogation.
Set the timer duration (days, hours, minutes) by pressing on
button, then validate and set the desired temperature on main screen.
Anti freeze Mode: Use this mode to put your room in anti-freeze
mode (the temperature is set in the Installation menu)
OFF Mode: To switch OFF the device. Be careful! In this mode,
OFF
your installation can freeze.
Auto Mode: In this mode, the room temperature will follow the
program you have chosen. You can choose between existing pro-
grams or you can create a new one that you can modify as you want.
Press on to select between:
d
a. Select: To select an existing program (EX Program 1, Program 5,
Program:Room1, Program: Room2)
b. Create: To create a new program. 5 Programs are created by de-
fault, additionally the user can create custom program in each heat-
ing room.
Select the days for which you want the same program, all days are higlit-
ed in red at the beginning.
Use the Comfort button
comfort temperature will be followed (brown range) and the reduced but-
ton to select the hourly ranges during which the reduced temperature
will be followed (blue range).
Use the arrows and
Validate the program; the validated days are then highlighted in green
(on this example: Mon,Tues, Wed, Sat and Sun).
The days that are not programmed are displayed in red.
Edit: To view and modify an existing program
c.
- 16 -
a
b
c
to select the hourly ranges during which the
to put the cursor on the desired hours.
Cod. 1910000000259 - nv00