Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Information: to view the current program
d.
P1: morning, evening & weekend.
P2: morning, midday, evening & weekend.
P3: day & weekend.
P4: evening & weekend.
P5: morning, evening (bathroom).
11. ON/OFF plug devices management
For setting follow procedure:
press on
1 2
in the main screen and press on
3 4
1
2
4
3
10
1.
Device type choice : Heating device
2.
Device type choice : On/off plug device
3.
Device type choice : Electrical radiator device
These buttons are only displayed if one device type is installed in the
room (colored if active).
4.
Scroll between device in the same room
5.
Device name
6.
General management for all ON/OFF plug in the room
7.
Information about the ON/OFF plug devices installed in the room.
8.
Indicates the lighting status. A press on it switches the ON/OFF status.
9.
Quick access to the desired room.
10. Scroll between rooms
11.
a.
When key-lock is activated
b.
When holiday mode is activated
c.
When away mode is activated
12. Electrical radiator devices management
For setting follow procedure: Press on
1
11
2
4
3
10
Cod. 1910000000259 - nv00
7
11
8
4
5
10
6
1 2
in the main screen and on
3 4
7
12
13
8
4
5
10
1.
Device type choice : Heating device
2.
Device type choice : On/off plug device
3.
Device type choice : Electrical radiator device
These buttons are only displayed if one device type is installed in the
room (colored if active).
4.
Only displayed if the number of devices is upper than 1; used to
select the devices in the room.
5.
Device name
6.
Current room.
7.
Information about the electrical radiator devices installed in the
room.
8
8.
General management for all the electrical radiator devices in the
room.
9.
Quick access to the desired room
10. Scroll between rooms
11. Activate/desactivate auto mode (long press)
12. Appear when the device is in auto mode. Allow user to manage the
weekly program
9
13.
a.
When key-lock is activated
b.
When holiday mode is activated
c.
When away mode is activated
13. Pairing
For setting follow procedure as below:
•
Create the room if it doesn't exist
House creation
•
Radio pairing
-
Choose the device type (heating/cooling)
-
Choose the room
Note: The master must be the first paired device.
-
Put the device in pairing mode (refer to device leaflet)
-
Start the pairing on the Central
-
Follow the instructions given by the Central (check on the device
that the pairing is successful, refer to the device leaflet)
Note: Automatic pairing time in case of RF communication loss:
10s.
8
-
When you have finished to pair all devices and installed all devices
in their final location, you have to make sure that the range allows
good communication between devices. Please modify the setpoint
on the central and make sure that the information is received by the
thermostat and the receiver.
•
Check the successful installation
9
- 17 -
House creation
→
→
Radio Pairing
→
→
Radio Pairing
→
→
TEST RF INSTALLATION
English
Publicidad
Tabla de contenido
