Medisana HP 605 Instrucciones De Manejo página 17

• Do not sit on the heat pad. Instead, rest the pad on or
against the part of the body to be treated. The intended
use of the HP 610 is to treat only back and neck.
• Never touch a heat pad that has fallen into water. Unplug the
unit from the mains outlet immediately.
• Keep the mains lead away from hot surfaces.
• Never carry, pull or turn the heat pad by the mains lead and
do not let the lead get tangled.
• Do not use the heat pad when wet and only use it in dry
environments (not in the bathroom or similar environments).
• The controls and leads must not be exposed to any kind
of moisture.
• If a fault occurs, do not attempt to repair the unit yourself.
Repairs must only be carried out by an authorized
specialist dealer or other suitably qualified personnel.
• If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
• A damaged power supply cable must be replaced with a
power cable of the same type.
• Heat pad may only be operated with the control unit (MAG 01HP)
supplied.
• When storing the heat pad, allow it to cool down before folding.
• Should you have any concerns about health issues, consult
your doctor before using the heat pad.
• Do not use the heat pad on parts of the body that are swollen,
injured or inflamed.
• Should you experience persistent pains in the muscles and
joints, please inform your doctor. Persistent pains can be a
symptom of serious illness.
• If you experience any pain or discomfort while using the unit,
stop using it immediately.
• Avoid bending the pad too much as objects placed on it during
storage may cause damage.
1 Safety Information
GB
13