Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
LABELS LIST & LOCATION
•
AUGER CONTROL
6
READ OPERATORS MANUAL BEFORE STARTING.
•
TRACTION CONTROL
INSERT IGNITION KEY INTO SLOT.
5
MAKE SURE IT SNAPS INTO PLACE.
DO NOT TURN KEY.
•
4
RECOIL STARTER:
PUSH PRIMER 2 OR 3 TIMES.
ELECTRIC STARTER: DO NOT PRIME.
3
•
PUSH START BUTTON OR PULL ROPE HANDLE
CHUTE
TO START ENGINE.
DIRECTIONAL CONTROL
2
•
SELECT SPEED REQUIRED. SQUEEZE RIGHT
C L O C K W I S E T O
T R ACT IO N CO N T R O L L EVE R T O M OVE .
DISCHARGE LEFT
CHUTE
1
RELEASE TO STOP.
RIGHT TURN CONTROL
COUNTER CLOCKWISE
TO DISCHARGE RIGHT
F
ALWAYS RELEASE TRACTION CONTROL
TILT
LEVER BEFORE CHANGING SPEEDS.
CONTROL
•
LEFT TURN CONTROL
FOR SNOWTHROWING, ENGAGE LEFT AUGER
R1
CONTROL LEVER BEFORE TRACTION
CONTROL LEVER.
R
IMPORTANT: THIS MACHINE IS EQUIPPED
WITH AN AUGER CONTROL LOCK.
TO STOP AUGER, BOTH AUGER CONTROL
R2
AND TRACTION CONTROL LEVERS MUST
BE RELEASED.
F O R S T E E R A B L E O P E R A T I O N :
SQUEEZE LEFT TURN CONTROL TO STEER
SNOWTHROWER TO THE LEFT. SQUEEZE RIGHT
TURN CONTROL TO STEER SNOWTHROWER
TO THE RIGHT.
•
TO STOP ENGINE, PULL OUT IGNITION KEY.
777I20729
777I20728
6
AUGER CONTROL
5
4
3
CHUTE
2
DIRECTIONAL CONTROL
CHUTE
1
C L O C K W I S E T O
F
DISCHARGE LEFT
TILT
COUNTER CLOCKWISE
TO DISCHARGE RIGHT
CONTROL
R1
R
LEFT TURN CONTROL
R2
777I20329
TRACTION
CONTROL
(CENTER MODEL PLATE
WITH TOP OF FRAME COVER)
777S32066
DANGER
1.
KEEP AWAY FROM ROTATING IMPELLER
AND AUGER. CONTACT WITH IMPELLER OR
AUGER CAN AMPUTATE HANDS AND FEET.
2.
USE CLEAN-OUT TOOL TO UNCLOG
DISCHARGE CHUTE.
DISENGAGE CLUTCH LEVERS, STOP ENGINE,
3.
AND REMAIN BEHIND HANDLES UNTIL ALL
MOVING PARTS HAVE STOPPED BEFORE
UNCLOGGING OR SERVICING MACHINE.
4.
TO AVOID THROWN OBJECTS INJURIES,
NEVER DIRECT DISCHARGE AT BYSTANDERS.
USE EXTRA CAUTION WHEN OPERATING ON
GRAVEL SURFACES.
5.
READ OPERATOR'S MANUAL.
CLEAN-OUT TOOL
777I20727
•
READ OPERATORS MANUAL BEFORE STARTING.
•
TRACTION CONTROL
INSERT IGNITION KEY INTO SLOT.
MAKE SURE IT SNAPS INTO PLACE.
DO NOT TURN KEY.
•
RECOIL STARTER:
PUSH PRIMER 2 OR 3 TIMES.
ELECTRIC STARTER: DO NOT PRIME.
•
PUSH START BUTTON OR PULL ROPE HANDLE
TO START ENGINE.
•
SELECT SPEED REQUIRED. SQUEEZE RIGHT
TRACTION CONTROL LEVER TO MOVE.
RELEASE TO STOP.
RIGHT TURN CONTROL
ALWAYS RELEASE TRACTION CONTROL
LEVER BEFORE CHANGING SPEEDS.
•
FOR SNOWTHROWING, ENGAGE LEFT AUGER
CONTROL LEVER BEFORE TRACTION
CONTROL LEVER.
IMPORTANT: THIS MACHINE IS EQUIPPED
WITH AN AUGER CONTROL LOCK.
TO STOP AUGER, BOTH AUGER CONTROL
AND TRACTION CONTROL LEVERS MUST
BE RELEASED.
FOR STEERABLE OPERATION:
SQUEEZE LEFT TURN CONTROL TO STEER
SNOWTHROWER TO THE LEFT. SQUEEZE RIGHT
TURN CONTROL TO STEER SNOWTHROWER
TO THE RIGHT.
•
TO STOP ENGINE, PULL OUT IGNITION KEY.
777D00334
777D03094
27
777D05309
R
E L E C T R I C S T A R T
9.0 HP
R E A D
I N S T R U C T I O N S
B E F O R E
S T A R T I N
G
(MODEL PLATE CENTERED
WITH TOP OF FRAME COVER)
777I20330
AUGER
CONTROL
777S32065
DANGER
NEVER PUT HAND IN CHUTE. CONTACT WITH
ROTATING PARTS CAN AMPUTATE FINGERS
AND HANDS. USE CLEAN-OUT TOOL TO
UNCLOG DISCHARGE CHUTE.
DO NOT UNCLOG DISCHARGE CHUTE WHILE
ENGINE IS RUNNING.
SHUT OFF ENGINE AND REMAIN BEHIND
HANDLES UNTIL ALL MOVING PARTS HAVE
STOPPED BEFORE UNCLOGGING.
ELECTRIC START
9.0/28
STEER
P O W E R E D
S T E E R I N G
Publicidad
Tabla de contenido
