Precautions Warranty; Precautions Warning Provisions Relating To Safety - Cristec YPO-DISPLAY-R Manual Del Usuario

1 PRECAUTIONS
The CRISTEC equipment includes the following :

A box containing the Remote Display

An interface board that has to be plugged into the YPOWER battery charger

A 7 meter cable, two 3‐pole connectors and six crimp wire terminals

A cable bushing

This user manual

Specific packaging
This document applies to the YPOWER Remote Display compatible with battery chargers from the YPOWER range as
listed on our website www.cristec.fr.
The manual is intended for users, installers and equipment maintenance staff. Please read this manual carefully before
working on the Remote display.
This manual should be kept safely and consulted before attempting any repairs because it contains all the information
required to use the appliance.
This document is the property of CRISTEC; all the information it contains applies to the accompanying product. CRISTEC
reserves the right to modify the specifications without notice.
1.1 P (
RECAUTIONS
The requirements for installation are contained in the NFC 15‐100 standards and in the specific standard "for pleasure
boats – electrical systems – Extra‐low‐voltage d.c. installations" ISO10133 reference.
The installation must be carried out by an electrician or a professional installer.
The DC network must be disconnected before starting any maintenance work on the equipment.
This equipment is not intended to be used by children.
Main precaution
Before handling the Remote Display, please read carefully this manual.
The addition of the YPO‐DISPLAY‐R option on an YPO charger 12V 40A can no longer claim to its
compliance with the ISO 8846 standard.
Precautions regarding dust, seepage and falling water
The Remote Display should be located so as to prevent penetration of damp, liquid, salt and dust,
any of which could cause irreparable damage to the equipment.
The appliance should be installed in a dry and well‐ventilated place.
Other precautions
The interface board contains electrostatic sensitive devices. Observe precautions for handling the
interface board. Before handling the interface board, please ensure your body is discharged.
Never attempt to drill or to machine the case of the Remote Display : this may damage components
or cause metal chips or filings to fall on the Remote Display board.
Do not do anything that is not explicitly stated in this manual.
– WARRANTY
) –
WARNING PROVISIONS RELATING TO SAFETY
17