3.3
D
ISPLAY MONITOR
Place the monitor on a dry place where it is easily accessible. The minimum cut‐out is 87 x 65 mm
On the top side, a Micro SD‐card can be inserted to update the firmware if necessary.
4
OPERATION
4.1
O
VERVIEW
Brightness can be switched between NIGHT and DAY modes by pressing the centre part of the screen.
The brightness of DAY‐mode can be adjusted in the setup while NIGHT‐mode is fixed.
4.2
AC
NETWORK OFF
The battery charger is off and the battery voltages can be read.
Charger's output is unavailable in this mode, so the ON/OFF charger output press‐button [3] is neutral.
4
3
1
2
1 : Battery voltages
2 : Access to parameters
3 : ON/OFF charger output
4 : AC network status
21