Control Panel Description - Tecnomac AQUAMAC 100 Manual De Instrucciones

UP KEY
– increases the display value during set-point and parameter value programming
– switches to next parameter
aux
DOWN KEY
def – decreases the display value during set-point and parameter value programming
– switches back to previous parameter
IMPORTANT:
ALL FACTORY DATA PROGRAMMING AND PARAMETER EDITING PROCE-
DURES MUST BE PERFORMED BY AN AUTHORISED TECHNICIAN
SEL KEY
SEL
– sets the set-point (see "SET-POINT")
– displays the value of the selected parameter (see "PARAMETER EDIT)
When pressed for more than 5 seconds together with the PRG key:
– opens the configuration menu (see "PARAMETERS - SECOND LEVEL")
PRG KEY
– mutes the audible alarm
PRG
If pressed when the appliance is switched on:
mute
– enables default parameters to be set (see "ALARMS and INDICATIONS")
When pressed for more than 5 seconds:
– opens the frequently used parameter programming menu
When pressed for more than 5 seconds together with the SEL key:
– opens the configuration menu (see " PARAMETERS - SECOND LEVEL")

4. CONTROL PANEL DESCRIPTION

comp
def
PRG
mute
SEL
W W A A R R N N I I N N G G ! !
W W A A R R N N I I N N G G ! !
THE FOLLOWING PROCEDURES
MUST BE PERFORMED
BY A LICENSED INSTALLER
aux
def
GB
17