Rexel SmartCut A100 Manual De Instrucciones página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
Cutting restrictions
• Remove staples, paper clips etc before
cutting
• Do not cut metal film or film containing
glass etc.
• Do not cut more sheets than capacity
allows
• Trimmer should be operated by an adult
or under adult supervision
Service
Do not attempt to service or repair the unit
yourself. If your trimmer is under warranty
return it to the point of purchase for
replacement or repair. If your trimmer is no
longer under the point of purchase return
period and requires replacement or repair,
please contact your supplier for further
assistance.
Guarantee
Operation of this machine is guaranteed
for two years from date of purchase,
subject to normal use. Within the
guarantee period, Rexel will at its own
discretion either repair or replace the
defective machine free of charge. Defects
due to misuse or use for inappropriate
purposes are not covered under the
guarantee. Proof of date of purchase will
Register this product online at www.rexeleurope.com
• Do not carry trimmer by holding onto the
cutting blade handle
• Always operate trimmer with both hands
on a stable base or desk
• Do not touch the edge of the blade
• Check the fittings of the rotary blade and
cutting rail from time to time
To replace the
blade carrier
Slide carrier to the centre of the cutting
1
guide at the 15cm mark A.
Open the cutting guide slightly and
2
remove the used carrier. Snap in the
new carrier. Your fingers will not touch
the blade B.
Only use the accessories that are
3
approved by the manufacturer.
be required. Repairs or alterations made
by persons not authorised by Rexel will
invalidate the guarantee. It is our aim to
ensure that our products perform to the
specifications stated. This guarantee does
not affect the legal rights which consumers
have under applicable national legislation
governing the sale of goods.
G
5

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Smartcut a200

Tabla de contenido