Playback; Section Repeat Playback; Play Mode - Aiwa MM-FX500 Instrucciones De Manejo

PLAYBACK

Section repeat playback

If you want to repeat a specific passage/
section of a file, use Section Repeat
Playback.
1 Select a file and start playback.
2 When you reach the start of the
passage to be repeated, press the A-
B button.
The A-B indicator will flash on the display.
mode
Play
Play mode will change as follows each time you press the PLAY MODE button.
Indicator
Sub text Repeat RNDM
NORMAL off
RANDOM off
RPT ONE
RPT ALL
RPT RANDOM
off Normal play in sequential order of MultiMediaCard 1 and 2.
Random play until all the files on MultiMediaCard 1 and 2
have been played.
off Repeat play of the current file.
off Repeat all the files on MultiMediaCard 1 and 2 in sequential order.
Repeat the random play of all files endlessly.
3 When you reach the end-point of the
passage, press the A-B button again.
Section Repeat Playback will start
automatically. The A-B Indicator stops
flashing and lights up on the display.
4 To resume normal play, press the A-B
button.
Notes
• If you press the 9 or 0 button during
Section Repeat Playback, repeat play is
canceled and play skips to the next or
back to the previous file.
• Section Repeat cannot be used on two
different files,as it will be disabled when
playback reaches the end of the file.
Time Counter
Elasped time and remaining time are shown
in the sub-text display during playback.
During playback press the MENU button
to switch between elapsed time and
remaining time.
Operation
25
ENGLISH