Product Features; System Requirements - Speedlink Medusa Instrucciones De Manejo

SL-8794_manual.qxd 07.03.2005
Introduction
Thank you for purchasing the Medusa 5.1 USB Surround Headset. With this
surround headset, you experience surround effects as if you were in the cinema!
Experience explosions behind you as if you were in the midst of the action!
Supplied with the product
• Medusa 5.1 USB Surround Headset
• User manual

Product features

• Padded head band
• High-quality microphone
• Height-adjustable head band
• Folding, cushioned ear pads
• Remote control integrated in cable (Volume/Mute Mic/On/Off)

System requirements

• USB port
• Windows® 98SE/Me/2000/XP
• CD-ROM drive
• Minimum 64 MB RAM
• Minimum 50MB free hard disk space
Note : The headset is only suitable for connecting to the PC!
Setting up
Note : The headset must be connected and switched on before software
installation.
Allocate a permanent USB port to the headset. If, after driver installation, you
use a different USB port for the headset, the system may not detect the head-
set.
1. Connect the headset directly to the USB port of your PC and wait until your
PC has detected the new USB device.
2. Switch on the headset using the switch on the cable remote control.
3. Insert the supplied CD in the CD-ROM drive.
4. If the installation program doesn't start automatically, click on
"Start/Run/Browse" and select your CD-ROM drive.
5. Double click on the file "setup.exe" and follow the instructions on the screen.
6. You can activate or deactivate the checkbox that defines whether you wish to
install the driver only or the demo program as well. Click on "Next" to start
installation.
7. When installation has finished, restart the PC.
09:40 Seite 9
9
D
GB
F
E
I