Attaching The Gate And The Locking Hooks - Gaterol Active Pro Manual De Instrucciones

The mesh can be rolled
out from any angle.

4.2. Attaching the Gate and the Locking Hooks

Mount the hook on the wall or frame with the screws (I). If mounting on wood, only use
the screws and do not drill holes unless necessary. If mounting onto concrete or brick,
drill holes and use the wall plugs (L). If mounting on any other material, be sure to use
an appropriate fixing system. Install the locking hooks to both sides of the wall or door
opening and make sure that the gate is properly stretched.
Install the upper
and lower wall
hooks (B & C) by
paper template A.
The gate
mounted vertically. Oth-
erwise, the locking system
will not work properly.
Locate the wall
hooks and overlay
the template
directly and
screw hooks to
the wall/frame.
must be
Install the upper
and lower locking
hooks (E & F) by
paper template B.
7
Locate the lock-
ing hooks and
overlay the tem-
plate directly and
screw hooks to the
wall/frame.