Fitting The Gate; Operating - Gaterol Active Pro Manual De Instrucciones

5. Fitting the Gate

1
Place the gate on
lower wall hook (C)
first.

6. Operating

With some exercise you can easily operate the gate with one hand. Before operating,
please make sure the gate is properly attached to the wall hooks, i.e. no red line visible.
2
Lean lightly against
the upper wall
hook (B), then
slide down un-
til you hear the
clicking sound of
upper and lower
wall hook. Make
sure the gate is
attached to the
wall/frame firmly
by upper and
lower wall hook.
After placing the
gate on the wall
hooks, the bottom
of gate has to be
completely flat on
the floor. If you can
see the red line,
please take off the
gate and place
again.
8
1
2
To remove the
gate, first retract
the gate. The press
down the button
on the top to un-
lock the gate from
wall hooks and lift
the gate up.