Child Lock - Bestron WINTER WARM AWH2000 Manual Del Usuario

Setting the power-on time:
3. Press TIMER again.
4. Then press - or + to set the hours.
5. Press TIMER again.
6. Press - or + to set the minutes.
The power-on time is now set. You can now set the power-off time.
Enter power-off time:
7. Press TIMER again.
8. Then press - or + to set the hours.
9. Press TIMER again.
10. Press - or + to set the minutes.
The power-off time is now set. The device will switch off after a few seconds.
The device will now turn on and off at the set times every Monday.
You can also set power-on and power-off times for the remaining weekdays. Then repeat steps 1 and 2, but
then select another weekday using the - and + key. For example, #4 indicates that you wish to set the on
and off times for Thursday.
Then continue with steps 3 to 10. Repeat this for every weekday that you wish to have the device turn on
and off automatically.
When you have finished setting the power-on and power-off times, you can also set the desired temperature
for each weekday.
Setting the temperature for each weekday:
11. Press DELAY. You will see a number (weekday) followed by two numbers (temperature).
12. Then press - or + to decrease or increase the temperature.
13. Repeat steps 11 and 12 to set the temperature for each weekday.
WARNING:
If you switch off the device with the Standby switch on the back, all settings will be lost. You must then enter
all settings again to use the weekly timer.
OPEN-WINDOW PROTECTION
The Open-Window protection ensures that the device switches off automatically if the ambient temperature
drops by more than 3 degrees in a short space of time, for example because a door or a window is open.
This prevents all hot air from evaporating immediately.
1. Press AUTO to activate the Open-Window protection.
2. Press AUTO again to deactivate the Open-Window protection.

CHILD LOCK

The child lock prevents children from changing the settings with the remote control. When the child lock
is activated, almost the entire display turns off and you can no longer operate the device with the remote
control.
1. Press LOCK to activate the child lock.
2. Press LOCK again to deactivate the child lock.
CLOCK
By pressing the CLOCK button on the remote control, the digital display shows the current time. After a few
seconds the display will return to the previous screen.
33
EN