Technical Data - OK. OTD 202-D Manual De Instrucciones

EN
TROUBLESHOOTING
Problem
Drying time
is too long
and the
results ore not
satisfactory.
(cont.)
Remaining time
on the display
stops or skips.

TECHNICAL DATA

Power source:
Max. working current
Max. load:
Drying programs:
Max. power:
Dry heating power:
Dimensions:
IP protection class:
Protection class:
OTD 202_A5_130723 (1.5).indb 50 OTD 202_A5_130723 (1.5).indb 50
Cause
• The laundry is too wet.
• The vent duct is blocked.
The remaining time will
be adjusted and corrected
continuously and automatically
based upon the following
factors:
• Type of laundry.
• Loaded amount.
• The degree of spinning dry of
laundry.
• Ambient temperature.
220 - 230 V~ / 50 Hz
12 A
8 kg
15
2500 W
2200 W
H 890 x W 660 x D 685 mm
IPX4
Class I
50
Solution
• Spin the laundry properly
before drying.
• Check the vent duct and
unblock it.
The automatic adjustment is a
normal operation.
22/7/13 4:13 PM 22/7/13 4:13 PM