(260IO) MODEL ECO 8220/8230 & 7220/7230 SALTWATER SYSTEM ENGLISH 7.5" X 10.3" PANTONE 295U 08/15/2014
HOW THE CHLORINE IS GENERATED
This product is specially designed for above ground pools. It will destroy the bacteria, oxidize
bather organics and control algae, which provide a safe, clean and comfortable swimming pool.
Common salt (sodium chloride) is made up of two elements, sodium and chloride. During the
installation of your Saltwater System, a measured quantity of salt is dissolved in the pool water
to make it slightly salty. The pool water flows through the Saltwater System 's electrolytic cell to
produce chlorine. The chlorine dissolves in the water and instantly starts destroying bacteria and
algae. It also oxidizes all other organic materials.
HOW THE ELECTROCATALYTIC OXIDATION WORKS
The Electrocatalytic Oxidation (E.C.O.) is an Advanced Oxidation Processes (AOPs). When
direct current is applied to the electrocatalytic oxidation electrodes, water will be discharged to
generate "hydroxyl radicals". The hydroxyl radical is a powerful oxidant, which oxidizes organic
contaminants, and destroys bacteria and algae. Hydroxyl radicals in combination with free
available chlorine provide the strongest and safest pool water sanitation.
PRODUCT SPECIFICATIONS
Model:
Wattage:
Ideal Salt Level:
E.C.O. Cell Output Current:
Maximum Chlorine Output/hour:
Filter pump minimum flow rate:
Limited Warranty:
Electrolytic Cell
Power Switch
Electronic
Control Station
SAVE THESE INSTRUCTIONS
ECO 7220/7230
65 W
3000 ppm (parts per million)
500 mA
5 grams/hour
700 ~ 3000 gallons/hour
(2650 - 11355 liters/hour)
see "Limited Warranty"
Hose Returning
Water to Pool
English
ECO 8220/8230
125 W
3000 ppm (parts per million)
800 mA
12 grams/hour
700 ~ 3000 gallons/hour
(2650 - 11355 liters/hour)
Flow Sensor
Hose from
Filter Pump
E.C.O.
Electrodes
Power Supply
Page 5
260
A