Power Failure; Moving Your Appliance - Domo DO906K/A++ Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 35
USE
TEMPERATURE CONTROL
You can set the temperature on the back of the appliance, with 1 being the
warmest and 5 the coolest.
The running time and temperature are affected by where the fridge is
located, how often the door is opened and the temperature of the room the
fridge is located in.
STORING FOOD IN THE FRIDGE
The fridge helps to extend the storage times of fresh perishable foods.
Fresh food care for best results:
· Store foods that are very fresh and of good quality.
· Ensure that food is well wrapped or covered before it is stored. This will prevent food from
dehydrating, deteriorating in colour or losing taste and will help maintain freshness. It will
also prevent odour transfer.
· Make sure that strong smelling foods are wrapped or covered and stored away from foods
such as butter, milk and cream which can be tainted by strong odours.
· Cool hot foods down before placing them in the fridge.

POWER FAILURE

· Most power failures are corrected within an hour or two and will not affect your refrigerator
temperatures. However, you should minimize the number of door openings while the
power is off. During power failures of longer duration, take steps to protect your food by
blacking dry ice on top of packages.
· Frozen food should not be affected if the power failure lasts for less than 15 hours.
· Do not refreeze frozen foods that have thawed completely. The food may be dangerous to
eat.

MOVING YOUR APPLIANCE

If the appliance is turned off for any reason, wait for 10 minutes before turning it back on. This
will allow the refrigeration system pressures to equalise before restarting.
· Turn off the appliance and unplug it from the mains socket. Remove all food. Also remove
all mobile parts (shelves, accessories, etc.) or fix them into the fridge to avoid any shock.
· Relocate and install. If the appliance has been left on its side for any length of time, leave it
standing upright for at least 10 minutes before turning on.
Your appliance uses isobutane (R600a) as a refrigerant. Although R600a is an environmentally
friendly and natural gas, it is explosive. Therefore you should be careful during shipment and
installation to prevent your appliance's cooler elements from being damaged. In the event of
a leak caused by damage to the cooler elements, move your fridge from open flame or heat
sources and ventilate the room where the appliance is located for a few minutes.
30
DO906K/A++

Publicidad

Tabla de contenido
loading

Tabla de contenido