Auto-Update - Scansonic R4S Manual De Instrucciones

Time/Date
The time and date can be updated manually or automatically. With auto-update, the time and date
are automatically synchronised with external clocks. Auto-update is generally more accurate.

Auto-update

The time and date can be updated manually or automatically. With
auto-update, the time and date are automatically synchronised with
external clocks. Auto-update is generally more accurate.
FM use time signals broadcast with radio transmissions.
Network uses a time signal sent from the Frontier Silicon Internet radio portal when in any network
connected mode.
01 Select Update from FM, Update from Network or No update.
02 Set your time zone.
03 If your country uses daylight saving, the automatically updated time may be wrong by one
hour. When daylight savings are in effect (during the summer), turn on the Daylight savings
option. Scansonic R4S will auto-update from the selected source when time information is
available
Manual set
If you set No update, the wizard now prompts you to set the time and
date manually.
The date and time are displayed as dd-mm-yyyy and hh:mm AM/PM
with the first value, dd, active (flashing).
Adjust each value with the Select control. As each value is set, the next value becomes active and
flashes.
7