Network - Scansonic R4S Manual De Instrucciones

Network

Scansonic R4S is compatible with all common network protocols and encryption methods, including
Wi-Fi Protected Setup (WPS).
To connect Scansonic R4S to your network, you need either a wired router and an Ethernet (RJ45
network) cable, or a Wi-Fi wireless router, together with password key if set.
Select:
• WLAN region/country
• Wi-Fi network (SSID)
Standard encrypted network
To enter the network's key (password), use the Selection knob to move
the cursor through the characters and select. As each character is
selected, the key is built up near the top of the display.
There are three options accessible by turning Select back before the
first characters (0123...)
Backspace, OK and Cancel.
Completion
Scansonic R4S tries to connect to the selected network.
If connecting fails, Scansonic R4S returns to a previous screen to try
again.
If the network connection is lost, Scansonic R4S automatically tries to
reconnect.
8