Elettro LEM1238 Instrucciones De Uso página 10

The built-in electronic switch prevents the charger from starting immediately when connected to the battery but
only after the user will select a charging mode.
The control and fulfilment of the charge cycle is managed by a microprocessor.
INCLUDING AS STANDARD:
Connecting clamps to the battery.
Cable with connector for cigarette lighter socket. In case the battery is situated in a difficult position to reach,
it's possible to use the connector for cigarette lighter socket to charge the battery.
MAINTENANCE
When the battery charger is not in use, it must be stored in a dry place.
To clean the outer case, disconnect the appliance and use a moister cloth. Do not use running water or
detergents.
The battery charger shall be repaired or serviced exclusively by qualified personnel.
10