General; Remove The Lawn Mower From The Carton; Handle; Operating Position - Husqvarna L321AH Manual Del Usuario

General

WARNING! Prevent unintentional
!
starting by removing the ignition cable
from the spark plug.
CAUTION! This lawn mower is shipped without oil or
gasoline in the engine.
Remove the lawn mower from the
carton
• Remove loose parts included with mower.
• Cut down two end corners of carton and lay end panel
down flat.
• Remove all packing materials, except padding
between upper and lower handle and padding holding
the engine brake handle to upper handle.
• Roll the lawn mower out of the carton and make sure
that no loose parts are left within the carton.

Handle

CAUTION! Take care not to damage the cables and
wires when you unfold the handlebar.

Operating position

1. Raise the lower handle section to operating
position. Align the handle bar pins with a slot in the
handle bracket to set a comfortable height position
for the handle.
2. Tighten the lower handlebar knobs.
3. Remove protective padding, raise the upper handle
section into place on the lower handle and tighten
both upper knobs.
10 – English

ASSEMBLING AND ADJUSTMENTS

4. Remove any packing material from around engine
brake handle.