Surge Protection - Oehlbach POWERSOCKET 907 Manual Del Usuario

SURGE PROTECTION

If the surge protection function of the Powersocket 907 is
triggered as a result of extreme voltage peaks, the eight
sockets (and all of the connected devices) are disconnected from
the mains. The Powersocket can be used again by pressing the
RESET button.
Correct operation of the active surge protection function is
indicated by the PROTECTED light.
FEATURES
· 8 individual sockets
· 4 digital (filtered) sockets / 4 analogue (unfiltered) sockets
· The two socket groups (filtered and unfiltered) can be
switched individually via two separate power switches
· Solid brushed aluminium housing in an anthracite finish with
sturdy plastic side caps
· Correct phase connection ensured by an indicator light and
phase marking on the individual socket
· Integrated sheath current filter protects against ground loops
and high-frequency transients
· 2 USB ports for charging devices (5 V, 2100 mA)
· Surge protection with LED indicator light
· 24 carat gold-plated plug contacts
· Extremely high-quality internal wiring:
High-purity and oxygen-free copper inner conductor
2,1 mm² inner conductor cross-section
Gold-plated brass rails for internal power distribution
· External power cable with IEC connector:
Oxygen-free copper inner conductor
1.5 mm² inner conductor cross-section
1.5 m cable length
POWERSOCKET 907
17