Measuring Process With The Ws1 - Merlin HM9 Serie Manual De Instrucciones

Operation
• Position the device and always apply it on
the wood with the appropriate pressure
(approx. 4 kg) for the measurement.
• There must not be any other media under
the wood, such as metal or similar materi-
als. This can influence the measurement.
Please observe the specific information pro-
vided in chapters 4.2.2 Measuring process
with the WS1 and 4.2.3 Measuring process
with the DUO.

4.2.2 Measuring process with the WS1

The WS1 offers the function of wood thickness
pre-selection. The thickness of the veneer
to be measured can be selected in 6 levels.
Press the left button to select
the thickness.
The setting which is closest
to the veneer thickness must
always be selected.
The selected wood thickness
is shown on the bottom left of
the display under the "M" (a).
(a)
78
0.50 mm
0.75 mm
1.00 mm
1.25 mm
2.00 mm
3 to 5 mm
Wood moisture meter