Merlin HM9 Serie Manual De Instrucciones página 80

Operation
Veneer stacks which are thicker than 3 mm
are measured with the 3 mm setting.
The veneer should be stacked as thick as
possible.
If the veneer is thinner than 5 mm, a Styro-
foam panel must be placed under the veneer.
▼ Position the Styrofoam as shown in the im-
ages.
Application examples:
One layer of oak veneer with a thickness of
0.55 mm
Selected settings:
• Characteristic curve: 700 oak
• Wood thickness pre-selection: 0.50 mm
79
HM9 WS1 | WS5 | WS13 | WS25 | DUO