Aqua Medic NR 5000 Manual De Instrucciones página 7

Denitrifying filter for fresh and sea water aquaria up to 3,000 l.
With the purchase of this Nitratereductor, you have selected a top quality product. It has been specifically
designed for aquaristic purposes and has been tested by professionals. With this unit, you are able to reduce
the nitrate concentration of your aquarium water efficiently to a harmless level.
1. Product description
The Aqua Medic Nitratereductor NR 5000 consists of the reaction vessel (height = 90 cm, volume approx. 30 l).
The reaction vessel is filled with Aqua Medic Bactoballs. In the top of the filter, the water outlet is placed. At
the top of this pipe, the port for the pressure resistant mV electrode (thread PG 13.5) is placed. The port for
feeding bacteria, the water inlet and circulation pump are placed at the bottom of the flter. One can with
denimar-Powder to feed the bacteria is included.
1. Needle valve (water inlet)
2. Water outlet
3. Feeding valve
4. Connection for mV-probe
5. Top with bayonet
6. O-ring for bayonet
7. Fitting for feeding
8. Valve
9. Fitting for water inlet
10. Pump OR 2500
11. Pump pressure side part 1
12. Pump suction side part 2
13. Pump pressure side part 2
14. Pump suction side part 1
Fig. 2: Nitratereductor NR 5000 lower part
Available spare parts: Please refer to www.aqua-medic.de.
7
Operation Manual ENG
Fig. 1: Nitratereductor NR 5000 upper part
Fig. 3: Nitratereductor NR 5000 top