Setting The Time - Panasonic RR-US300 Instrucciones De Funcionamiento

Setting the time

The clock is used for file names ( ➜ page 26) and recording date and time information so set
the correct date and time. The date and time need to be set after the battery is replaced.
• Turn the power on beforehand. ( ➜ page 7)
• After turning the power on for the first time
after purchase or replacing the battery,
proceed to step
1
2
3
4
8
● The clock operates with a monthly loss/gain of approx. ±60 seconds at normal temperature.
● The clock setting will be cleared if the battery completely runs out of power.
8
.
3
Press [MENU/REPEAT MODE].
Press or to select "DATE"
and press [ OK].
Press or to
set " " (year)
and press .
• Set the last two digits of the year.
("11" in the case of 2011)
Press or to set "
(month) and press
5
Press
and press
• To return to the previous setting item,
press
6 Press
display format and press
Select "
for 12-hour display.
• The display format that is blinking is
currently selected.
7
Press
and press
8 Press
(minute).
To change the setting, press
move between the items, and press
"
again to make the setting.
.
Press [
9
setting.
• The date and time are set and the clock
starts to operate.
or to set " " (day)
.
.
or to select the time
.
" for 24-hour display, and "
or to set " " (hour)
.
or to set " "
and
OK] to confirm the
"
to
and