Using The Recovery Cd - AIRIS KIRA Serie Manual De Usuario

2. Press F1 key at this moment to enter the system recovery mode. As in Fig.
A-2, the system will first ask you if you want to proceed with the system
recovery process. Please type "Yes" to continue, "No" to cancel it.
Fig. A-2: Confirmation of Continuing With System Recovery
3. Please do not shutdown or power off your system during system recovery.
After a few seconds, the system will be recovered and rebooted.
A-2 Using the Recovery CD
You can also use the included recovery CD to quickly recover your system to
its factory state. Please follow the steps below to carry out the system
recovery:
1. Please connect an external optical drive through the USB port on your
system.
2. Insert the Recovery CD into the drive and make sure your system is
configured to boot up from your optical drive.
3. As shown in Fig. A-3, upon being greeted with the main screen of the
recovery program, you may press F2 to switch the language. You may also
press F1 to find out other options. Press Enter to continue and follow the
instructions shown on the screen.
40