Blu-Ray Audio Setting; Digital Out - Sylvania LD427SSX Manual Del Usuario

 Blu-ray Audio Setting
Choose the appropriate audio settings for your equipment. It only affects
during the playback of BD/DVD.
3
1-2
Follow steps on page 47, then use [Cursor K / L ] to
select " ", then press [ENTER].
or
4
Use [Cursor K / L ] to select "
or
5
Use [Cursor K / L ] to select the desired item, then press
[ENTER].
BD Audio Mode
You can select whether to output the primary and
secondary audio or only the primary audio.
Mix Audio At the same time, 7 outputs the primary and
Output secondary audio if it is available.
HD Audio
Outputs only the primary audio.
Output

Digital Out

Set to "Bitstream" when this unit is connected to a
Dolby Digital decoder and DTS decoder.
When playing back discs recorded in Dolby
Digital, Dolby Digital Plus, Dolby TrueHD, DTS
Bitstream
or DTS-HD, the corresponding core stream
(Dolby Digital or DTS) are output.
2ch PCM signal will be output from Digital
LPCM
Audio Out jack.
Custom
Language
Video
Audio
Parental
Others
", then press [ENTER].
Audio
BD Audio Mode Mix Audio Output
Digital Out Bitstream
Down Sampling On
DRC Auto
(Default: Mix Audio Output)
Audio
BD Audio Mode Mix Audio Output
Digital Out Bitstream
Down Sampling On
DRC Auto
(Default: Bitstream)
Audio
BD Audio Mode Mix Audio Output
Digital Out Bitstream
Down Sampling On
DRC Auto
Español
Down Sampling
This function is available only on digital outputting of a
disc recorded in 96kHz.
On When outputting in 48kHz.
Off When outputting the original sound.
Note:
• When playing back a 96 kHz disc with the copyright
protection or when ''Virtual Surround" is set to "1" or "2",
the sound will be down sampled at 48 kHz even if the
"Down Sampling" is set to "Off".
(Refer to "Virtual Surround" on page 46.)
DRC (dynamic range control)
This function is available only on the discs which are
recorded in the Dolby Digital format.
or
When the discs that are recorded in the Dolby
TrueHD format is in playback, this unit detects
Auto
DRC setting of the disc and set the DRC setting
of this unit to "On" or "Off" automatically.
Compress the range between soft and loud
On
sounds.
Off No effects (original sound).
6
Press [SETUP] to exit.
Français English
(Default: On)
Audio
BD Audio Mode Mix Audio Output
Digital Out Bitstream
Down Sampling On
DRC Auto
(Default: Auto)
Audio
BD Audio Mode Mix Audio Output
Digital Out Bitstream
Down Sampling On
DRC Auto
EN
49