Still Mode; Audio Mode - Sylvania LC195SLX Manual Del Usuario

[] Still Mode
Yoncanpausethe imageshown on the TVscreen.
Press [STILL] to pause the image shown on the TV
screen.
STILL
, The sound outputwill not be paused.
, If no signal is detected or protected signal is received
during still mode, the image remains paused and the
sound output will be muted.
, The still function will be released after 5 minutes.
To cancel still mode, press any button except [POWER].
[] Switching Each Input Mode
Youcaneasily switch with the remote control t o the DTV(ATSC) and TV
(NTSC) o r to access external devices when they are connected to the unit.
Press [INPUT SELECT] or [CH A] repeatedly to cycle
through the input modes.
INPUT
SELECT
or
DTV/TV channel
l
l
l
l
_.___J
Pressing [CHV] reverses the direction of the input
modes.
[] Switching Audio Mode
Thissection describeshowto switchthe audio in the analog modeand how
to switch the audio languagein the digital mode.
....i
z_
Press [AUDIO] to display the currently selected
audio mode. While receiving an MTS broadcast,
press repeatedly to cycle through the available audio
channel.
AUDIO
When all audio are available
When stereo and monaural audio are available
When SAP and monaural audio are available
When only monaural audio is available
(cannot be switched)
: Outputs stereo-audio
: Outputs second audio program
: Outputs mono-audio
STEREO
SAP
MONO
_ Press [AUDIO] to display the currently selected
language and the number of available languages.
AUDIO
_ Press [AUDIO] repeatedly to cycle through the
available audio languages.
AUDIO
Available languages differ depending on the
broadcast."Other" is displayed when the audio
language cannot be acquired, or the acquired
languages are other than English, Spanish or French.
Note: I
• [AUDIO] does not control external audio devices.
• The information display will automatically disappear in a
few seconds.
i
Z_
ii !iii_!!!_i
ii iiiii!il
Ui
!;iii,i_!_
ii :Z_
ii ......
i! Z!I','
il C_,
iii!_iiiill
ii iii!_::i
il _i!ii!_i
EN