Sd Card; Specifications - Televes 232130 Manual De Instrucciones

9. SD Card

It allows the downloading of the values extracted for each fu-
sion to the card (provided the card is inserted). The values can
thus be read or extracted into a PC later on.

10. Specifications

Manufactured in Europe.
Accepted fibre types: SM (9/125 micron, with 250-micron or
900-micron protection), MM (50/125 micron and 62.5/125 mi-
cron).
Fusion and oven capacity (per battery charge):
+/- 60.
Fusion modes: 2. Predefined (Single-mode (SM) and multimo-
de (MM) fibre).
Fibre alignment: Cladding alignment.
Typical loss after fusion:
SM 0.03 dB /MM 0.01 dB.
Detection of possible anomalies in the fibre (prior to fusion).
Loss estimation (after fusion).
Indication of the cutting angle of each fibre.
Time required for the fusion operation: 7 seconds.
Time required for the heat-shrink tubing adjustment (35 se-
conds for 45-mm, and 60 seconds for 60-mm tubes).
Equipment languages: ES-EN-DE-IT-FR-SV-CS-TR-PL-NL-RU.
Interfaces:
Mini USB (for possible upgrades).
SD-Extreme (not included) for the recording and ex-
traction of the parameters used in the fusion operation.
Lens magnification: 140X.
Colour LCD screen, 2.8", 320 x 240 pixels.
Equipment dimensions: 230 mm (height) x 98 mm (width) x
54 mm (depth).
Weight: 0.8 kg.
7.4V, 3000 mA battery (Li-Ion).
External power supply unit: 6V, 1.5A, 100-240V AC / 50-60 Hz.
Work environment: From 0 oC to 45 oC / 95% Maximum relati-
ve humidity (with no condensation).
33
EN