Trotec MultiMeasure Basic BZ 30 Manual De Instrucciones página 21

Display . . . . . . . . . . . . date and time, relative humidity,
temperature, Max/Min, CO
Sampling rate . . . . . . . . . . . . . . . . . . . . . . . . 2 seconds
Overload display . . . . . . . . . . . . . . . . . . . . . . . ."-OL-"
Power adaptor . . . . . . . . . . . . .input: 110 V ~ 220 V AC
(alternating current) output: 6.0 V DC (direct current)
Environmental conditions . . . . . . . . . . . . .-5 °C - 50 °C
Storage conditions . . . . . . . . . . . . . . . . . .-5 °C - 50 °C
(23 °F bis 122 °F) - < 90 % R. H.
Data memory . . . . . . . . . . . . . . . . . . . . . 50,000 values
5.0 Software Introduction
The Multiple-Datalogger Software is a program to read-
out and process measuring data of an instrument which
is connected to a computer or notebook. The data can
be charted by the software or graphically displayed with
Excel or similar programs. The major functions are all
listed in the main window.
System Required
Windows 2000 /Windows XP /Vista/Windows 7
EN
(23 °F - 122 °F) at < 90 % R. H.
Operating Manual – CO
Minimum Hardware Required
value
PC or Notebook with Pentium 90 MHz or higher 32 MB
2
RAM ; at least 7 MB byte hard disk space available to
install the Multiple Datalogger software. Recommended
display resolution 1280*1024 with High Colour (32 bit).
5.1 Main Menu
File
Save
Open
Print Setup
Print Preview
Print
View
Toolbar
Status Bar
Instrument
air quality data logger
2
Save the recorded data to the disk.
Open a saved file.
Change the printer and printing
options.
Print preview the graph or the list.
Print the graph or the list or the
data summary.
Show or hide the Toolbar.
Show or hide the Status Bar.
Show or hide the instrument window.
B - 5