Care And Maintenance - Lavorwash KOLUMBO Manual De Instrucciones

> TO SPRAY DETERGENT
To spray and mix the detergent with steam:
- Press button ⑰ on the pistol grip.
.> Machine stop (at end of work)
At the end of the work shift, stop the machine in the
following way:
1) Press boiler switch button to (0) OFF ⑪
2) Press main switch to (0) OFF ⑩.
3) Unplug the machine from the electrical power
supply.
Boiler steam discharge
Follow the instructions below:
- A few minutes before the end of the work shift,
turn off the boiler by pressing the BOILER START
luminous green push-button, continuing to use
the steam gun until the pressure gauge indicates
a value of 0-1 bar;
IMPORTANT: Should it be necessary for any
reason to de-activate the machine quickly, place
the main switch on the control panel to the OFF
position.
• WARNING:
• V15 While the machine is functioning, it
is strictly forbidden to remove safety devices
set by the Manufacturer for the purpose of
protecting the operator against incidents.
- Only skilled and qualified operators must use
the machine.
- Avoid aiming the steam lance towards
OPERATION
1 Boiler cleaning
2 Visual checks
3 Cleaning the
burner
4 General clea-
ning
MACHINE PART
1 Remove limestone from the boiler
2 Machinery + gun
2 Electrical parts
2 Integrity of the water and steam
hoses and gun
3 Ignition electrodes, Diesel nozzle
4 External cleaning
personnel or delicate objects such as plastic,
crystal or other materials which may melt or
deteriorate with contact to steam at 180°C.
- Never leave the machine unattended.
- Always remove the power supply from the
machine before filling the tanks.
- The machine does not work if distilled water is
used to fill the tank

CARE AND MAINTENANCE

IMPORTANT: Before doing any work
on the cleaner, discharge the pressure
and disconnect the electricity and water
supplies.
SEE ROUTINE MAINTENANCE TABLE
• WARNING
Before any maintenance or replacement activity,
remember to:
- stop the machine (MAIN SWITCH turned to
OFF)
- unplug it.
• K1 Maintenance, replacement or servicing
activities described in this handbook must be
entrusted only to skilled operators familiar
with the technology used on the machine.
• K2 Consult qualified personnel at the
manufacturer or sales outlet for any adjustment,
tuning or replacement actions not included in
this manual.
PERIODICITY
1 Every year
2 Every week
2 Every mont
3 Every year
4 Every week
21
EN
Authorized After Sales
Service
The user
The user
Authorized After Sales
Service
The user