Lega 4410EM Manual De Instrucciones página 11

1.2 SPECIFICATIONS
Overall dimensions (WxDxH)
Total absorption
Total weight
Screw diameter
Number of screw revolutions
Standard no. of revs at 50Hz (600Nm torque) rpm
Hourly output
1.3 MACHINE OPERATORS
CAUTION! FOR SAFETY PURPOSES, THIS MACHINE SHOULD BE USED BY SKILLED STAFF ONLY, AWARE OF
THE INSTRUCTIONS CONTAINED IN THIS MANUAL WHICH FORMS AN INTEGRAL PART OF THE MACHINE.
The cappings press has been designed for operation by a single worker.
Basic technical and mechanical skills are required to correctly operate the machine and carry out maintenance
and basic servicing.
This machine must exclusively be used to squeeze and recover honey from cappings and separate honey
from wax.
LEGA
srl
Costruzioni Apistiche – via Maestri del Lavoro 23 – 48018 Faenza
www.legaitaly.com - Tel 054626834 – Fax 054628279 – P.iva 00043230390
mm 1500x620x620
w 750
kg 120
mm 180
rpm 1.5 -> 4.3
3.07
kg/h 125 -> 360
The screw feeder is made of
high quality food grade plastic,
especially durable and resistant.
A perforated tray is placed
under the cage to serve as a
preliminary filter. Wax residues
from cappings squeezing are
collected here, while honey
flows through the holes.
11 / 54