Problem
Cubes are partially
formed or are white at the
bottom.
Noise during operation
The ice maker stops
suddenly while making
ice.
The body of the ice maker
is electrified.
Scaling occurs frequently
inside the machine.
Possible Cause
Not enough water in the
water trough.
The feet are not leveled
and locked.
Certain sounds are normal.
The electricity is off.
The room temperature is
out of the stated range.
The ice storage bin is full
of ice.
The grounding line isn t in
the socket.
The hardness of the water
is too elevated.
21
Probable Correction
Check if water supply
pressure is below 15 psig.
Check water supply; filter
may be restricted.
Check for a leak at the
water tank.
Check that ice bin is level;
adjust if necessary.
See Normal Sounds.
Reconnect the power supply
line.
Cut off the electricity; let
the ice maker stop working
until the temperature returns
within the stated range.
Remove some ice cubes.
Make sure the water curtain
and microswitch are closed.
Use a socket meeting the
required electrical standard.
Use a water-softening
device installed before the
water inlet.